faqts : Computers : Operating Systems : Novell : Netware : Emulators : VMWare

+ Search
Add Entry AlertManage Folder Edit Entry Add page to http://del.icio.us/
Did You Find This Entry Useful?

10 of 11 people (91%) answered Yes
Recently 9 of 10 people (90%) answered Yes

Entry

VMWare v4.0.5 for Windows: Operating system: Install: Novell: Netware: v6.0: How install Novell v6?

Dec 2nd, 2003 18:41
Knud van Eeden,


----------------------------------------------------------------------
--- Knud van Eeden --- 01 December 2003 - 10:50 pm -------------------

VMWare v4.0.5 for Windows: Operating system: Install: Novell: Netware: 
v6.0: How install Novell v6?

---

Steps: Overview:

 1. -Insert the Novell Netware v6 CD, this CD is bootable,
     and will start the installation

 2. -You will see a screen saying 'Starting Caldera DR-DOS...'

 3. -Press 'B' when asked 'ID-CDROM' or 'SCSI CD-ROM'
     (this is important)

 4. -Select 'Select this line to install in English'

 5. -select from list 'Accept License Agreement'

 6. -select from list 'Create a New Boot Partition'

 7. -select from list 'Continue'

 8. -select from list 'Continue'

 9. -Press any key to reboot

10. -Make sure you have your CD-ROM as first boot device
     (otherwise change it via pressing <F2> when rebooting,
     (click on the VMWare window first, to give it
     focus), then tab 'boot', and move 'CDROM' upwards.

     Otherwise you might see a screen saying:

     'Operating system not found...'

11.  Make sure you have a floppy disk unit connected in VMWare (via
     menu 'Edit'->'Virtual machine settings'-> tab
     'Hardware'->Add->'Floppy drive') You might have to restart VMWare
     first, if the floppy disk unit is not detected.

     So you should see in menu 'Edit'->'Removable devices' and a
     CD-ROM, and a floppy disk, afterwards.
     And or you should see the floppy disk icon on the
     VMWare window taskbar below right.

12. -You will see a screen saying 'Starting Caldera DR-DOS...'

13. -Press 'B' when asked 'ID-CDROM' or 'SCSI CD-ROM'

14. -You will now see a screen saying

      'Boot partition being formatted'

15. -Note that you must have at least 180 megabyte of RAM
     assigned to your Novell Netware v6.0 in VMWare.

     If that is the case you will after a while
     see the graphical screen

       'Novell Netware 6 Networking services'

     I had 256 megabyte RAM and Microsoft Windows XP Professional but
     this was not enough to install a full Novell Netware v6 before. So
     I only had black MSDOS screens as stated. It is of course much
     more nicer to have a graphical user interface (also), after the
     installation is finished.

16. You see now the graphical screen
    'Novell Netware 6 networking services'

17. -Press <F10> to accept the license agreement

18. -Select the 'Express' install, by selecting 'Continue'
     (use <TAB>)

19. -You will see now a screen similar to:

       The Express installation will select the following
       defaults:

        A 4GB Volume SYS will be created

        LAN and disk drivers will be auto discovered

        Country code: 1

        Codepage: 437

        Video: Super VGA Plug and Play

        Keyboard: United States

        Mouse: Auto

        Default products will be installed:

         - Native File Access

         - iManage

         - Novell Advanced Audit Services

        To select specific options or add additional products
        such as:

         -iFolder

         -iPrint

         -NetStorage

        go back and choose 'Custom Installation'

20. -Select from list 'Continue'

21. -You will now see a screen:

       - File group: Netware Installation Pre-copy

       - Source path: Z:\STARTUP

       - Destination path: C:\NWSERVER\...

      while it is copying files.

22. -After finishing copying, you will see 'Please Wait'

23. -You will see 'Loading driver'

24. -Select the driver (LAN) that best matches your system,
     or press <F10> (=no selection)

25. -I selected the default 'CNEAMD.LAN'

26. -You will see 'Loading driver'

27. -You will see 'Saving system information'

28. -You will see 'Looking for disk devices'

29. -You will loading 'mounting CD-ROM'

30. -You will see 'transferring default unicode files'

31. -You will see 'transferring system files'

32. -It will now start copying mostly Java files

33. -You will now a see a graphical interface appear
     showing 'Please Wait',
     'Copying Files...'
     and a flashing 'N' from Novell.

34. -You will now see 'Initializing installation wizard'

35. -Fill in the name for your server in 'Enter the server name'

      e.g. 'DELLI8500'

36. -click button 'Next'

37. -You will see now 'Accessing server...'

38. -Enter the location of the region specific cryptography
     modules. These files can be found on the Netware 6
     license cryptographic diskette.

     Default location: 'A:\License\'

     (This are files with the extension .NFK)

39. -I chose 90359290.NFK

40. -Specify the network protocol for each network board

     1. Click on 'IP' so that this is enabled (V)

     2. fill in an IP address (e.g. 192.168.0.3)

     3. fill in a subnet mask (e.g. 255.255.255.0)

     4. fill in a router gateway (leave empty if
        standalone machine)

41. -I chose 'Create new NDS tree' for 'Select eDirectory install'

42. -In NDS information for tree name I chose 'TEST'
     and for 'context for server object' also 'TEST'

43. -In 'Administrator information' I chose
     Admin Name=admin
     Admin Context=root
     and supplied the admin password twice

44. -You will now see 'Installing NDS'
     'Updating NDS schema'

45. -You will now see:

      NDS is installed on DELLI8500

      NDS tree name: TESAT

      Server context: O=TEST

      Administrator name: CN=admin.O=root

      After completing the server installation use
      Console One to modify and configure NDS

46. -I enabled option 'Install without licenses'
     IT said then 'No licenses will be installed
     at this time. You may use iManage to install
     licenses latger.

47. -It will then inform that it will install additional
     products like

     Netware OS

     native file access for Windows

48. -You will see:

     'iPrinting'

     'Clustering'

     and so on.

49. After installation, remove the diskettes
    and reboot.

50. You will then see the graphical Netware
    'Networking services' screen with in the
    left bottom the 'Novell' start button
    with options like
    -ConsoleOne
    -Install
    -Programs
    -Utilities
    -Settings
    -Run
    -Close GUI

51. Now possibly install VMWare tools

---
---


Successfully installed Novell Netware v6 on Microsoft Windows XP
Professional, running VMWare v4.0.5 for Windows workstation.

---

Time needed: about 1 hour

---

Disk space needed: about 400 megabytes.

---
---

Internet: see also:

---

Novell v6 installation
http://www.novell.com/documentation/lg/nw6p/index.html?
page=/documentation/lg/nw6p/setupenu/data/acwj0jb.html

---

VMWare Novell installation
http://www.vmware.com/support/guestnotes/doc/index.html

---

VMWare v4.0.5 for Windows: VMWare tools: Install: Novell: Netware: How 
to install VMWare tools?
http://www.faqts.com/knowledge_base/view.phtml/aid/27143/fid/1594

---

VMWare: v4.0: Operating system: Install: All: Overview 
[Windows/Linux/Unix/FreeBSD/Solaris/Novell]
http://www.faqts.com/knowledge_base/view.phtml/aid/22119/fid/1149

----------------------------------------------------------------------